[Top] [All Lists]

Re: [TowerTalk] Tower-mounted enclosure

To: "'TOWERTALK'" <>
Subject: Re: [TowerTalk] Tower-mounted enclosure
From: "Keith Dutson" <>
Date: Tue, 3 Jan 2006 08:15:11 -0600
List-post: <>
I would choose a ventilated aluminum enclosure.  You can mount bulkhead
Polyphasers and attach the box to a tower leg using metal clamps.

73, Keith NM5G

-----Original Message-----
[] On Behalf Of Butch
Sent: Monday, January 02, 2006 4:23 PM
Subject: [TowerTalk] Tower-mounted enclosure

Hi all,

I am about to erect a 50' Rohn 25 tower in my back yard. Atop the tower will
be a small tri-bander, a 6-meter yagi and at the very top, a 10-meter
vertical for local nets/chatting. Suspended from the tower, just below the
tri-bander will be my 75-meter dipole. So, I will have 4 runs of coax
descending the tower to the remote switch and one run from the switch into
the shack.

I am planning to install A Polyphaser on each run, above the switch and
mounted in an enclosure of some type. Any suggestions as to type of
enclosure works well over time? Sealed? Ventilated? Plastic?
Metal? get the idea. Thanks.

Butch K4NAU

No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.14.10/218 - Release Date: 1/2/2006


TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>