[Top] [All Lists]

[TowerTalk] 18 HT Hytower

To: <>
Subject: [TowerTalk] 18 HT Hytower
From: "Bill Winkis" <>
Date: Fri, 6 Jan 2006 11:18:15 -0500
List-post: <>
Replaced all the standoff insulators,on my 18HT with ..water pump clamps fed 
through 1" PVC, shaped to the tower edge, then drill a hole the pefect distance 
off the tower into the end of the pvc. Also notched or elongated the outer edge 
of the hole in the pvc, a tad, so the screw (see below-1) would slide through. 
Then feed the element up through the hole.

-1....Also removed all the clamps on the elements, and replaced  them with 
narrow flat SS self taping screws, so the screw head can now also fit through 
the hole in the pvc...


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] 18 HT Hytower, Bill Winkis <=