Towertalk
[Top] [All Lists]

## Re: [TowerTalk] Foldover calculations

 To: "Towertalk Reflector" Re: [TowerTalk] Foldover calculations "David Hachadorian" Tue, 10 Jan 2006 14:58:35 -0000
 ```----- Original Message ----- From: "Mike Bragassa, K5UO" To: Sent: Tuesday, January 10, 2006 1:06 PM Subject: [TowerTalk] Foldover calculations > Need the calculations / methodology for how much tower can be added > for the Rohn 25g Foldover. Cannot locate in my Rohn catalog. Specs show 32.5' below the hinge, and 35.5' above the hinge, for a total of 68'. At that height, the safe weight at the apex is 100 pounds, which means that the max allowed moment about the hinge is 100 x 35.5 = 3550 ft-lbs. If you try to add one more r25 section at the top, that would add 40 pounds at a distance of 40.5 ft, which would produce a moment of 1620 ft-lbs, which would be ok, leaving 3550 - 1620 = 1930 ft pounds margin. If you added another section, it would be another 40 pounds at 50.5' = 2020 ft lbs, so you would be over weight. Even with only one section added, you would need two guy levels above the hinge, because you can't have 40.5' between guy levels with r25. Apparently, from horror stories I've heard, there is not much of a safety margin on these foldovers. Weight at the top is a limiting factor. Dave Hachadorian, K6LL Yuma, AZ _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk ```
 Current Thread [TowerTalk] Foldover calculations, Mike Bragassa, K5UO Re: [TowerTalk] Foldover calculations, David Hachadorian <=