Any ceramic capacitors in the circuit?
> -----Original Message-----
> From: firstname.lastname@example.org [mailto:towertalk-
> email@example.com] On Behalf Of Bill Coleman
> Sent: Monday, January 23, 2006 10:28 PM
> To: Larry Phipps
> Cc: firstname.lastname@example.org
> Subject: Re: [TowerTalk] SWR shifts with power
> On Jan 23, 2006, at 10:01 PM, Larry Phipps wrote:
> > I would suspect an intermittent connection... either a coax
> > connector or
> > maybe a joint between tower sections. You should bridge the sections
> > with straps. Also the rotator bearings should be bridged with
> > straps...
> > anything that could provide a marginal connection.
> I swapped out the coax with another line - same problem.
> I doubt the tower section joints are a problem, although the rotator
> might be interesting.
> I was thinking more like it might be a problem in the matching
> network itself.
> Bill Coleman, AA4LR, PP-ASEL Mail: email@example.com
> Quote: "Not within a thousand years will man ever fly!"
> -- Wilbur Wright, 1901
> TowerTalk mailing list
TowerTalk mailing list