Hi Mike,
You can get solid fiberglass rod from MSC (www.mscdirect.com) I used this
rod for my 25G base insulators. You can see a photo of these insulators by
clicking on the Tower 4 link at www.k7mi.com and scrolling to the bottom
photo. You will need to turn down the ends on a lathe. If you don't have
accesss to a lathe drop me an email and I can help.
73 de Larry K7MI
----- Original Message -----
From: "Mike Bragassa, K5UO" <bragassa@consolidated.net>
To: <towertalk@contesting.com>
Sent: Friday, January 27, 2006 5:21 AM
Subject: [TowerTalk] Fibreglass rod sources?
> Building a 80m vertical from Rohn 25g sections and need some fibreglass
solid rod; 1.5" OD, preferably 1.75" OD, to insulate/isolate the Rohn 25
tower base section. Besides Max-Gain Systems (only have up to 1.5"), where
are my choices? A search on fibreglass, fibreglass rod gets me lots of
fishing poles!
>
> Mike, K5UO, 9H3UO
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|