Towertalk
[Top] [All Lists]

Re: [TowerTalk] V antenna?

To: "'Hector Garcia XE2K'" <j_hector_garcia@sbcglobal.net>,<towertalk@contesting.com>
Subject: Re: [TowerTalk] V antenna?
From: "AD5VJ Bob" <rtnmi@sbcglobal.net>
Date: Fri, 10 Feb 2006 03:08:40 -0600
List-post: <mailto:towertalk@contesting.com>
Thanks for the idea Hector:

That might just work.
Can the loop be at an angle or does it have to be vertical
or horizontal?

How can I position the loop it so that the radiation is at
the highest point?

 

  73 fer nw,
Bob AD5VJ

10X# 37210, FP#-1141, SMIRK#-5177
http://www.n5iet.com/
Code may be taking a back seat for now,
but the pioneering spirit that put the code
there in the first place is out front of it all.




> -----Original Message-----
> From: towertalk-bounces@contesting.com 
> [mailto:towertalk-bounces@contesting.com] On Behalf Of
Hector 
> Garcia XE2K
> Sent: Friday, February 10, 2006 12:50 AM
> To: AD5VJ Bob; towertalk@contesting.com
> Subject: Re: [TowerTalk] V antenna?
> 
> Bob:
> 
> that configuration will work, but why don't try a 80
loop , 
> square chape or a delta loop ?
> the loop can gives your other bands with low swr 
> 
> or find the way to get a high horizontal Dipole
> 
> 
> 
> 
> 
> --- AD5VJ  Bob <rtnmi@sbcglobal.net> wrote:
> 
> > I am about to move to a place where I have about 2
acres and four 
> > *very* tall oak trees at adjacent corners of the
lot(each 
> about 100' 
> > or more in height and about 200'
> > apart). 
> > 
> > I presently have an inverted V for 80 meters. The apex
is 
> at about 25 
> > feet. The ends are somewhat lower.
> > 
> > Now I am wondering if after the move if I can use the
same mast for 
> > the center (abt 25') and put the ends toward the top
of the trees.
> > 
> > It would be a V not an inverted V. Does anyone know if
this 
> would work 
> > for an antenna?
> > 
> > 
> > 
> >   73 fer nw,
> > Bob AD5VJ
> > 
> > 10X# 37210, FP#-1141, SMIRK#-5177
> > http://www.n5iet.com/
> > Code may be taking a back seat for now, but the
pioneering 
> spirit that 
> > put the code there in the first place is out front of
it all.
> > 
> > 
> > 
> > 
> > _______________________________________________
> > 
> > 
> > 
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> >
> http://lists.contesting.com/mailman/listinfo/towertalk
> > 
> 
> 
> Hector Garcia XE2K / XF1K
> Mexicali B.C  DM22fp
> 
> http://www.dxxe.org
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>