Towertalk
[Top] [All Lists]

[TowerTalk] new yaesu rotor failure mechanism

To: "YCCC" <yccc@yccc.org>,"reflector cq-contest" <CQ-Contest@Contesting.COM>,"reflector -tower" <towertalk@contesting.com>
Subject: [TowerTalk] new yaesu rotor failure mechanism
From: "David Robbins K1TTT" <k1ttt@arrl.net>
Reply-to: k1ttt@arrl.net
Date: Fri, 17 Feb 2006 19:21:27 -0000
List-post: <mailto:towertalk@contesting.com>
Well, while powering up today for the weekend contest one of my Yaesu rotor
control box indicators failed to turn.  So I pulled out one of the spare
boxes and plugged that in... unfortunately when I turned it on the indicator
motor spun up to full speed but the needle didn't move!  Opening it up
showed a broke drive belt... looks like dry rot of the rubber as there are
some other small cracks in the rubber.  Besides looking like a real pain to
replace, does anyone know of a source for these little rubber belts?  And
how to specify them??  It looks to me more like an o-ring than something
meant for driving a gear train.  But anyway, its about 1.5" in diameter, or
about 4.75 in circumference and 1/16" thick.


David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
 


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>