> On Sun, 19 Feb 2006 03:20:10 +0000, Ed Stallman wrote:
> >Any problem with putting both 80 M / 160 M dipole on one feed
Here is a pic of my 3 wire dipole
I used 14 inch long pvc with a holes drilled 1 inch from the ends to feed
the wires thru, that keeps the wires 12 inches apart.
I have also not detected any interaction between the 20,40 and 80m wires. I
did however end up adding a bit of length to each wire to tune them to mid
band. ( I thought that I would have to trim them when I made the antenna)
I do not know if this is due to interaction between the wires or just the
You can also see the air-wound choke, the 10m dipole made out of aluminum
angle and my 2m collinear at the very top.
Hope this helps a bit.
(I am no expert, I just keep experimenting until I get it to work, whatever
(IT) may be.
TowerTalk mailing list