Hi, David. Glad you found something that worked. That will translate to an
AS568A Standard size -026 O-ring, should anyone have access to a well
stocked hardware or industrial supply outlet.
Here's a URL for one vendor's chart of standard sizes:
73, Brad, W9FX
----- Original Message -----
From: "David Robbins K1TTT" <firstname.lastname@example.org>
To: "reflector cq-contest" <CQ-Contest@Contesting.COM>; "reflector -tower"
<email@example.com>; "YCCC" <firstname.lastname@example.org>
Sent: Friday, February 24, 2006 3:17 PM
Subject: [TowerTalk] yaesu rotor control box belt fix
> For those who may be interested, or who later search the archives, the
> replacement o-ring I found for the g-1000sdx box (should also be the same
> for g-2700sdx and g-2800sdx at least) is a 1-1/2x1-3/8x1/16 faucet o-ring.
> Hillman part number 780068 at tractor supply co. also listed as Faucet
> (I think, printing not very good, could be 1-4I or 1-41) found in my
> tractor supply by searching through the little drawers that were in no
> logical order under the muffler display.
> David Robbins K1TTT
> e-mail: mailto:email@example.com
> web: http://www.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
TowerTalk mailing list