[Top] [All Lists]

Re: [TowerTalk] yaesu rotor control box belt fix

To: <>, <>
Subject: Re: [TowerTalk] yaesu rotor control box belt fix
From: "Brad Pioveson W9FX" <>
Reply-to: Brad Pioveson W9FX <>
Date: Fri, 24 Feb 2006 16:12:42 -0600
List-post: <>
Hi, David.  Glad you found something that worked.  That will translate to an 
AS568A Standard size -026 O-ring, should anyone have access to a well 
stocked hardware or industrial supply outlet.

Here's a URL for one vendor's chart of standard sizes:

73, Brad, W9FX

----- Original Message ----- 
From: "David Robbins K1TTT" <>
To: "reflector cq-contest" <CQ-Contest@Contesting.COM>; "reflector -tower" 
<>; "YCCC" <>
Sent: Friday, February 24, 2006 3:17 PM
Subject: [TowerTalk] yaesu rotor control box belt fix

> For those who may be interested, or who later search the archives, the
> replacement o-ring I found for the g-1000sdx box (should also be the same
> for g-2700sdx and g-2800sdx at least) is a 1-1/2x1-3/8x1/16 faucet o-ring.
> Hillman part number 780068 at tractor supply co.  also listed as Faucet 
> 1-4J
> (I think, printing not very good, could be 1-4I or 1-41)  found in my 
> local
> tractor supply by searching through the little drawers that were in no
> logical order under the muffler display.
> David Robbins K1TTT
> e-mail:
> web:
> AR-Cluster node: 145.69MHz or telnet://


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>