[Top] [All Lists]

[TowerTalk] Yaesu rotators

Subject: [TowerTalk] Yaesu rotators
From: Pete Smith <>
Date: Tue, 21 Mar 2006 06:47:19 -0500
List-post: <>
A Yaesu G-1000 fit my stock Rohn shelf without drilling any new holes, but that 
was in 1995 (a new shelf then). 

A trick that takes advantage of the Yaesu mast clamp's centering capabilities - 
 Tighten the mast clamp on the mast first, with all the other bolts loose; then 
tighten the bolts that hold the clamp to the top of the rotator, using the 
index marks on the rotator case to get it centered; finally, tighten the bolts 
that hold the rotator to the shelf.  The shelf holes have enough adjusting room 
to take up normal amounts of misalignment.

73, Pete N4ZR

At 06:34 PM 3/20/2006, Robin Midgett wrote:
>Hi again Bruce,
>Yes, the stock Rohn shelf is easily cut with a fine tooth blade and a 
>jig saw. Likewise, boring new holes is easily done with standard 
>metal cutting drill bits.
>I can send you a drilling template for the Yaesu rotor bolt pattern 
>if you need one. I believe the factory holes are for Hy-Gain rotors. 
>My drill template includes those too, so you can align the template 
>on the shelf using the Hy-Gain holes as an aid.
>At 11:00 AM 3/15/2006, you wrote:
>>Message: 1
>>Date: Wed, 15 Mar 2006 08:49:27 -0600
>>From: "Mike Bragassa, K5UO" <>
>>Subject: [TowerTalk] Yaesu Rotor/Bearing
>>To: <>
>>Message-ID: <008701c6483f$a92bd740$6400a8c0@MAIN>
>>Content-Type: text/plain;       charset="iso-8859-1"
>>I think these types of rotors; very much like the Create rotors 
>>which are worm-gear driven,  requires that the vertical loads be put 
>>on the rotor and not relieved by a bearing. Confirm that in your manual.
>>Mike, K5UO
>>Can the Rohn AS25G accessory plate be cut easily and with what type of saw?
>>Without sacrificing strength can a Yaesu rotor GS-450 be mounted on 
>>a cut plate? I will be using a thrust bearing (TB3) for the vertical 
>>load.  Does the AS25G accommodate the Yaesu rotors without having to 
>>re-drill mounting holes?
>Robin Midgett K4IDC
>615-322-5836 office - rolls to pager
>615-835-7699 pager
>615-301-1642 home
>TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>