I installed an aluminum 30 ft. freestanding Universal Tower for VHF and UHF
antennas and am very satisfied with it. It assembled together well and has
been trouble-free. See:
I think the location of the manufacturer is more important than the location
of the dealer with regard to freight costs. Given your QTH, Universal Tower
would be a plus because it is located relatively closeby in Michigan. As
far as 60 footers, its windloading is only 6.5 sq ft. (100 mph zone rating).
However, if you drop down to 50 ft. the windloading increases to 10.5, which
*may* be adequate for you. Good luck on the project!
----- Original Message -----
From: "N9BOW" <email@example.com>
Subject: [TowerTalk] Self Supporting Tower Wanted not sure what to
> We are getting ready to move into our new home in East Central Iowa.
> I am looking to purchase a new or used free standing tower. I want to go
> feet and hang a SteppIR 3 element a Two meter stick and maybe a two meter
> yagi as well as some dipoles from the tower.
> Our elevation is very good, its about the highest around but with that
> brings a lot of wind at the new tower site. I would prefer to find a
> closer to my QTH to save on shipping if I go new. Anybody have an opinion
> ANWireless towers? Or any other freestanding tower manufacturer or dealer
> the upper Midwest.
TowerTalk mailing list