[Top] [All Lists]

Re: [TowerTalk] 10-40 Beam Wanted OR TET 43L HELP

To: "Wayne Harrell" <>, <>
Subject: Re: [TowerTalk] 10-40 Beam Wanted OR TET 43L HELP
From: Joe - WD0M <>
Date: Thu, 06 Apr 2006 18:51:15 -0600
List-post: <>
Hi Wayne,

The only 10 - 40 M beam I'm aware of is the 
MonstIR by the SteppIR company - but it has a 
very large wind load area.  However, SteppIR will 
be presenting to the market (at Dayton) an 
antenna that has (your choice of) either 3 or 4 
elements that covers 6M - 40M.  Although it is a 
bit on the pricey side, it would do what you want 
with a relatively small wind load area.  I have 
their 4 element version now that covers 6M - 20M, 
but will be adding the element that transforms it 
to cover 30M and 40M as well.  My antenna is on a 
TX-455 tower at about 55 feet.  The Rohn 25G 
should accept that wind load with no problems.  Good luck in your endeavors.


At 02:20 PM 4/6/2006, Wayne Harrell wrote:
>I am needing a hf beam for 10-40 or even a 20-40 beam.
>I have friends installing a rohn 25 at 50 ft
>I would appreciate input on the beams that are 
>not so big or have too much wind load.
>Thanks for the help. I am disabled and confind 
>to a wheelchair. I have a TeT 43L beam that a 
>friend is trying to make work. It tunes flat 
>20-40 but does not have directivity.
>Any ideas to make it work.
>Wayne Harrell WD4LV


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>