Be sure to check the innards of the cheezy balun that CC provides.... I had
one that had a cold solder joint at the center connection of the SO239.
Luckily I had decided not to use it, as it's "drain" hole was located in the
top of the box....
----- Original Message -----
Subject: Re: [TowerTalk] New Cushcraft XM240 Trouble
>> Finally the balun was bypassed and
>> the coax connected directly to the driven element but that did not
>> seem to make much difference.
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 0615-2, 04/12/2006
Tested on: 4/12/2006 10:57:39 PM
avast! - copyright (c) 2000-2004 ALWIL Software.
TowerTalk mailing list