We are considering a 40m vertical moxon to augment our 3 element 40m wire beam
for this year's field day. Here in the Pacific Northwest the beam at 65'
elevation gives good gain and wide enough horizontal beamwidth to cover the
easterly stations. However the low angle radiation is not so good. EZNEC
shows the 40m vertical moxon to have pretty good gain (~9 dbi) down to about 2
degrees above horizon.
However I am concerned about the Brewster angle effect and that EZNEC may be
ignoring it. In looking over a number of books and articles the discussion of
the Brewster angle appears to be concerned with verticals working against
ground. I am trying to determine if the Brewster angle effect for the Moxon
negates the low angle radiation of the moxon. The 3 element beam is pretty
good down to about 20 degrees or so.
>From these discussions and the web, it appears that the low angle radiation
>advantage shown by EZNEC is not going to be produced because of the brewster
Has anyone tried the vertical moxon on 40m that can compare it to horizontal
antenna at half wave height?
TowerTalk mailing list