Towertalk
[Top] [All Lists]

Re: [TowerTalk] Ground rod connection: Cadweld or ????

To: towertalk@contesting.com, W5LT@comcast.net
Subject: Re: [TowerTalk] Ground rod connection: Cadweld or ????
From: K7LXC@aol.com
Date: Mon, 24 Apr 2006 15:20:17 EDT
List-post: <mailto:towertalk@contesting.com>
 
In a message dated 4/23/2006 8:34:02 P.M. Pacific Daylight Time,  
towertalk-request@contesting.com writes:

>  HI All:
>  I am putting in a ground system at my  new QTH. Will have a ground ring at
the tower with (4) ground rods, plus  (2) radials plus a home run separate
but in parallel with the RF and  control cables running to the tower from the
shack (about 90  ft).
>  There will be three rods along each radial leg.  
>  I know Cadweld (or equal) is the best ground wire to rod  connection, but
what should I use as 2nd best? Cadweld seems to be rather  expensive, and
takes some skill to implement.


        The two connection methods  approved by the National Electrical Code 
are 1) exothermic (CadWeld, etc.) or 2)  mechanical, which means clamps or 
similar method. 
 
Cheers,
Steve     K7LXC
TOWER TECH -
Professional tower services for commercial and amateur
Cell: 206-890-4188
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>