Could you explain why a balun can't be tested ?
----- Original Message -----
To: <firstname.lastname@example.org>; <email@example.com>
Sent: Saturday, April 29, 2006 3:46 AM
Subject: Re: [TowerTalk] KLM KT34A to KT34M2 Upgrade high SWR
> In a message dated 4/27/2006 9:03:38 A.M. Pacific Daylight Time,
> firstname.lastname@example.org writes:
> > Is the Balun bad or did I miss something else? New 9913F7 cable and
> Amphenol PL-259 connectors were used. I am quite confident that all
> connections and dimensions as well as parts placement are correct. I am
> certain about the Balun and can only hope that is the problem, think it
> changed on the antenna without taking the whole thing down. Anyone had a
> similar problem? Is the Balun bad?
> Probably. You've got a pretty simple system - coax, balun and
> antenna. My bet's on the balun. You can't test them. The only thing you
can do is
> try another and see if the condition changes.
> Steve K7LXC
> TOWER TECH
> TowerTalk mailing list
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.385 / Virus Database: 268.5.1/327 - Release Date: 28/04/2006
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.5.1/327 - Release Date: 28/04/2006
TowerTalk mailing list