Mike DeVivo wrote:
>I am considering putting up a 30 foot Universal tilt over tower. There would
>be a 3 element HF Tribander and a mono band 2 meter and a mono band 440
>beams. The VHF and UHF beams would be vertically polarized.
>
>Universal recommends that nothing be 6 feet above the the tower.
>
>Other than physically speaking, I know about the 1/2 wave length guide line
>of the lowest frequency. Does this apply only if another ham and I were
>using two antennas on the tower at the same time or does this apply to the
>function of a single antenna transmitting and some sort of over load
>
Follow the link from my home page (below) to "Stacking".
--
73 from Ian GM3SEK 'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.co.uk/g3sek
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|