[Top] [All Lists]

Re: [TowerTalk] TitanDx

To: "'AD5VJ Bob'" <>, <>
Subject: Re: [TowerTalk] TitanDx
From: "W0MU Mike Fatchett" <>
Date: Sun, 21 May 2006 21:59:22 -0600
List-post: <>
Clean up the joints with a scotch brite pad...The green ones.  They work
great.  Then apply a light coating of an anti oxidant that you can buy at
Lowes or Home Depot.  Noalux or similar.

No need for sand paper.

Good Luck!


-----Original Message-----
[] On Behalf Of AD5VJ Bob
Sent: Sunday, May 21, 2006 9:44 PM
Subject: [TowerTalk] TitanDx

What do you guys think?

Just had a TitanDx delivered today. All the parts are there although it is a
bit used.

Came from an SK.

I don't really want to just throw it up. I would like to refurbish it first
(not only honoring the antenna but the SK as well).

Has anyone ever done that with any antenna, much less one this
sophisticated, I have not.

I think I first want to clean the elements. I was thinking about using a
soft brillow pad or light sand paper.

Then I thought it might be best to ask on the reflector what you experienced
guys would recommend. 

After thinking about it I thought I might damage the antenna by changed the
wall thickness of the antennas elements.

  73 fer nw,
Visit My Ham Blog

10X# 37210, FP#-1141, SMIRK#-5177
Code may be taking a back seat for now,
but the pioneering spirit that put the code there in the first place is out
front of it all.


TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>