[Top] [All Lists]

Re: [TowerTalk] Phillystran for Wire Dipoles in Trees?

To: Jim Brown <>
Subject: Re: [TowerTalk] Phillystran for Wire Dipoles in Trees?
From: Kevin Stover <>
Date: Wed, 31 May 2006 17:40:00 -0500
List-post: <>
Jim Brown wrote:

>We've had several threads on this topic, and none of the options 
>seemed ideal or conclusively good.  I've moved to a new QTH, with 
>lots of 100 ft tall redwoods. I need to hang long dipoles with heavy 
>wire and heavy feedlines (I want to run high power). When I find 
>someone to climb, I'll have them put good quality pulleys in the 
>trees and rig some lines into them. Short term, I'm throwing ropes 
>over branches. 
>I've had bad experience with the 5/16" Dacron sold by Davis RF/Radio 
>Bookstore, which says it is made by Synthetic Textiles. This seems 
>to be the same stuff that DX Engineering sells.  The failure mode 
>I've seen is wear at the pulley. One of my friends suggested 
>Phillystran as a better alternative. Does anyone have any thoughts 
>or experience on this topic?  
>I'll probably have to pay a good buck for the climber, so paying a 
>bit more for rope that doesn't need to be replaced in a few years is 
>a no-brainer. Are there any other good alternatives? Are any of the 
>sailing lines worth the added cost?  How about polyester? 
>Jim Brown K9YC
Dacron is a brand name (DuPont) for polyester.
I've never had a problem with any of the Dacron line I've used and I've 
used some from Cable Xperts and DX Engineering.
If you keep having failures at the pulley I think you may have a size 
mismatch between the line and the pulley.
Any rope made of any material will fail in that situation sooner or later.

R. Kevin Stover ACØH

K2/100 #4684

Reclaim Your Inbox!


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>