No experience at all in this matter.
But just one question, what about the near RF field when some metal or other
propellers are turning close tothe airial.
Wouldn't that produce a flutter on received signals ?
Just a stupid queqtion....
De : firstname.lastname@example.org
[mailto:email@example.com] De la part de Jim Lux
Envoyé : dimanche 2 juillet 2006 23:33
À : Cqtestk4xs@aol.com; TOWERTALK@contesting.com
Objet : Re: [TowerTalk] Wind generators/towers and antennas
At 01:18 PM 7/2/2006, Cqtestk4xs@aol.com wrote:
>I am in the midst of designing a new station for KH6 and it appears I
>may be putting up some Rohn 55 as a support for a wind generator to
>It certainly would be a shame to let a good 60-90 foot of tower be
>wasted on just that and the thought occurred to me that the tower
>could be used as a support for wire antennas as well as possibly
>Has anyone had experience with mounting antennas on the same tower as
>wind generators? If so, what was the experience with RFI on the
>antennas? And if
>not on the same tower, has anyone had experience mounting antennas
>anywhere near the wind generator and what, if any RFI was noticed?
>KH6 law restricts hams to one 90 foot tower
You might want to check on the ham-law reflector, but I suspect that a flat
restriction to one tower would not comply with the PRB-1 requirement to
"reasonably accommodate". What if you wanted to build a 80 meter phased
array, with 1/2 wave verticals?
In a somewhat similar situation with OTARD antennas (dishes etc), someone
put up 5 poles and I don't recall how many dishes, the city said no, you
only get one, the courts said, uh uh, the premption doesn't work that way,
you have to allow whatever the person wants unless you can articulate a
specific historical preservation or safety concern.
OTOH, you could be in the delightful(?) position of having the law on your
side, but needed to spend many tens of kilodollars to prove it.
The tower for wind generator idea is a clever one to get around it. And,
of course, is there a requirement that you have to have your windmill
actually generate any electricity in any significant amount (assuming you
don't want it for power, although a wind generator is a nifty idea in and
of itself). Perhaps a suitable clutch arrangement to keep the generator
from turning (although the prop still does) and making noise when you're on
the air? Or, can you use the windmill for pumping?
TowerTalk mailing list
TowerTalk mailing list