----- Original Message -----
From: "JC Smith" <email@example.com>
Sent: Wednesday, July 05, 2006 7:46 PM
Subject: Re: [TowerTalk] Grounding base slab and pier tower bases
> Fellow TTers,
> We have had an interesting discussion of grounding methods and I sure
> learned something new from the Ufer ground discussion. Now, keeping in
> the LXC Prime Directive (FOLLOW THE MANUFACTURER'S INSTRUCTIONS) I wonder
> what to think of this advice from the manufacturer of my new tower (Dan at
> AN-Wireless): "I'm no expert on grounding by any means, but I do know
> ground rods must not be placed through concrete into the foundation /
> in any manner, nor should the tower base be bonded to the rebar." I seem
> remember similar advice from US Tower when I installed my current tower.
> 73 - JC, K0HPS
I am not sure that I agree with that, JC (at least not in general). Look at
base connection for the Tashjian (old Tri-ex) crankup tower. The base of the
tower is not only electrically connected to the rebar cage, it's actually
part of it
(each of the 3 flange ears that the tower bolts against are welded to a
of large diameter rebar which in turn is tied to the rest of the cage. I
US tower bases are done more or less the same way.
73, Mike W4EF......................
TowerTalk mailing list