At 07:41 AM 7/12/2006, Michael Tope wrote:
>----- Original Message ----- From: "Jim Lux" <email@example.com>
>>>I wonder... if you roll (the long way) copper strap you could put it inside
>>>hose. As long as the inside circumference of the hose was greater than the
>>>width of the strap you wouldn't be forming a tube with the strap. What if
>>>you slit the copper tube before using it, would that be enough to allow both
>>>the inside and outside to conduct high frequency current?
>>There's no reason why you couldn't propagate current on the inside of the
>>pipe without slitting it. That's what happens in coax.
>Not without a center conductor. Otherwise you'd have a waveguide
Only if you're propagating the wave in a transverse mode. DC is below
cutoff, but it's carried on the inside(as well as inside the metal,
etc.). The question might be, if you have a seamless tube, and you have a
current on the inside, will the magnetic field push it to the outside. An
TowerTalk mailing list