Hmmm..another variation on the question. It seems one ought to be able to
run two inverted L's from the same feedline, using the same radial field
(common radial plate). Fanning them out from the base up to the tie point
and separating them a foot or two at the top end might work? Same principle
as a "fan" dipole for 80/40, no?
In my situation, I could run the horizontal portion of the 80 and 160
sections in opposite directions, feeding them both at a common base and
----- Original Message -----
From: "Eric Rosenberg" <email@example.com>
To: "Towertalk" <firstname.lastname@example.org>
Sent: Wednesday, July 12, 2006 2:44 PM
Subject: [TowerTalk] Question on Multiple Inverted L Antennas
>I have an inverted-L for 160 with 24 radials that works really well.
> I'd like to add 80m and possibly 40m by having those respective vertical
> elements attached to the same radial system.
> My question: how far apart must the respective elements -- vertical and
> horizontal -- be from each other?
> My concern is a result of there being a single tree (i.e., tie off point)
> at each end of the antenna (where the L takes place and at the end of the
> horizontal section).
> Your help and advice is greatly appreciated!
> Eric W3DQ
> Washington, DC
> TowerTalk mailing list
TowerTalk mailing list