I made this request before and got some info, which I very much appreciate, but
a friend advised me to re-post this request with more explanation of the good
cause it is in support of.
I am on the board of trustees of a local Christian classical K-12 school
(www.heritagechristian.com) which has won an FCC license to build a low power
FM radio station.
With a great deal of volunteer work and donated resources we are building a
broadcast/recording studio that will give our students the opportunity operate
an FM broadcast radio station and work in a near-professional grade broadcast
and recording studio. We are designing the studio with full accoustics, and
three sound isolated studios, a large performance studio, a smaller talk-show
studio, and a 1-2 person booth.
The Tri-Ex T-588 was made available to us by a local ham with a critical
medical condition. It is our hope to erect this tower (with full guying) on top
of a large concrete tilt-up building to support a circularly-polarized FM
broadcast antenna about 100' in the air. This seems like a good use for a
lightweight tower like this.
Being that we are a school, the local city building and safety commission takes
our building permits and inspections very seriously (as well they should), so I
am sure I will need an engineered drawing of the T-588 to be part of our permit
application. I have gotten specs like weight and wind load in emails, but I am
really hoping someone out there has the original Tri-Ex engineered drawing for
the T-588. Otherwise we may have to forgo use of this tower and keep looking.
Thanks very much!
- Tom Scott
TowerTalk mailing list