I would use polyurethane sealant made by Vulkem if you are not going to
replace the caps. You can get it at most hardware stores and it sticks much
better, especially in sunlight. You might also want to drill a small hole in
the bottom of the capacitor tubes on the end towards the element ends. I had
trouble with water in the capacitor tubes on my 3 KT36s and these small
holes greatly reduced the trouble.
----- Original Message -----
From: "david ashpole" <email@example.com>
Sent: Tuesday, July 25, 2006 3:17 PM
Subject: [TowerTalk] KT34XA capacitor caps
> Hi All,
> Can I use clear silcone caulking on the cracked capacitor caps without a
> problem? I am in a rush to get it on the tower! Thanks to all for all the
> terrific advice I get from this reflector!
> Dave NB7V
> Montana, the last best place
> Express yourself instantly with MSN Messenger! Download today - it's FREE!
> TowerTalk mailing list
TowerTalk mailing list