Found your reference to Bill's posting in which you describe the process.
N4LI also wrote a similar article (Plumber's Delight Coax Connector) in Ham
Radio magazine, May 1981, about using the copper pipe adapter and the
Amphenol PL-258 (barrel) that uses a retaining ring for the "insides" to
produce a female UHF connector. Found that in my "archives."
All the PL-258's I have do not use a retaining ring. They are probably
force-fit by a machine. Perhaps Amphenol still makes them the old way, so
will have to research that.
73, Norm, W1MO
----- Original Message -----
From: "Pete Smith" <email@example.com>
To: "Norm Duxbury" <firstname.lastname@example.org>
Sent: Tuesday, August 08, 2006 15:47
Subject: Re: [TowerTalk] Connectors for 3/4 in. CATV Hardline
> Check the towertalk reflector for a message from W4AN on what he uses - I
have used them for 10 years with not a single problem. If you can't find
I'll repeat, but would rather not unless necessary.
> 73, Pete N4ZR
> At 12:54 PM 8/8/2006, you wrote:
> >Does anyone know a source for connectors f/u/w 3/4 in. CATV hardline?
> >73, Norm, W1MO
> >TowerTalk mailing list
TowerTalk mailing list