I have a large Makita hammer drill and a ground rod attachment for it. It
The ground here is hard clay with a lot of rock mixed in. Using a standard
fence post driver, I can't get anything in more than 2 to 3 feet and even
that's a lot of work. The hammer drill gets a full 8' in and takes between
30 to 60 seconds.
It was a bit of an investment but it sure is nice to have when you need it.
You might be able to rent one. I tried that route, but none of the rental
places around me had one that would match the only ground rod attachment
piece I was able to find.
----- Original Message -----
From: "Allen R. Brier" <email@example.com>
To: "'Tower Talk Reflector'" <firstname.lastname@example.org>
Sent: Monday, August 14, 2006 1:32 AM
Subject: [TowerTalk] Sinking ground rods
> What is the best/easiest method to sink ground rods? I know the trick of
> using water to fill the hole several times to make it easy, but I have
> heard that the ground contact is not as good using this method vs.
> the rod in the hard way, in dry ground. Which is best?
> Allen Ross Brier, N5XZ
> TowerTalk mailing list
TowerTalk mailing list