It's called "Balanced Capacitive Matching" and is described on Mosley's
web site. Scroll down the following page and look for the Classic Feed
Bill - W9NHQ
----- Original Message -----
From: "Bill" <email@example.com>
To: "Peter Voelpel" <firstname.lastname@example.org>; "'Towertalk'"
Sent: Tuesday, August 15, 2006 9:06 AM
Subject: Re: [TowerTalk] TA-33 Classic Feed Model TAC-33K
> Well it is not a T-match, Pete. A T-match does not have a split
> element and th ends are indeed attached tot he driven element.
> sound like a Beta match either since there is no direct coupling to
> elements using inductance to match the feedpoint reactance. Sounds
> like a means of reactively coupling to the the elements with primarliy
> capacitive coupling since the coax center conductor is inside the
> element. The design of the coupling would naturally take into account
> feedpoint impedance R-jX (or in this case perhaps R+jX) in a fashion
> the R is the characteristic impedance of the coax and the jX is the
> matchin reactance. Neat idea.
> ----- Original Message -----
> From: "Peter Voelpel" <email@example.com>
> To: "'Towertalk'" <firstname.lastname@example.org>
> Sent: Tuesday, August 15, 2006 6:53 AM
> Subject: Re: [TowerTalk] TA-33 Classic Feed Model TAC-33K
>> Hi Dave,
>> To me that sounds more like a T-match
>> -----Original Message-----
>> From: email@example.com
>> [mailto:firstname.lastname@example.org] On Behalf Of WA3GIN @
>> County, VA
>> Hi folks,
>> Just received a new TA-33M with TAC-33K feed.
>> I've never seen a driven element feed like this one. Its a clever
>> implementation. Where the two ends of the driven element converge at
>> boom a hollow insulated coupling is provided so that the two sections
>> slip into the insulator, making the connection water resistent and
>> eliminating the need to split the feed-line coax wand weather proof
>> coax shield, etc. In the middle of the insulator is an SO-239
>> connection. Inside the insulator there are two pieces of coax (I'm
>> guessing RG8) center conductor (shield removed but insulation
>> with the ends swrink wrapped) that are simply slid inside each end of
>> the driven element. That is it. No direct connection to the
>> I'm guessing this is Mosley's version of a "BETA" matching system.
>> Any thoughts on this technique or clarification as to whether this is
>> indeed a "BETA" match?
TowerTalk mailing list