[Top] [All Lists]

Re: [TowerTalk] HyGain BN style balun question.

To: <>
Subject: Re: [TowerTalk] HyGain BN style balun question.
From: "John Wagner" <>
Date: Tue, 22 Aug 2006 16:33:44 -0400
List-post: <>
The BN-86 I had on my old 204BA was a ferrite rod with turns of enameled
wire around it. It was a low power version of the BN-4000. The latest
BN-4000B data sheet claims it uses coax with type 77 ferrite beads over it
and capable of 2kw continuous...

John W8JJW

> It thought the HyGain Balun is supposed to be a current 
> balun, which to my understanding is just ferrite beads on 
> coax.  If this were true, the balun would show no resistance 
> from the center pin of the connector to one attachment point 
> and infinite resistance to the other.
> Not so....  No resistance from/to any of the 4 accessible 
> points (two element attachment points, center pin of 
> connector and outer shell of connector).
> Has anyone ever had one of these apart and could explain the 
> configuration ?
> I need this information because in my use of the balun, it 
> makes a difference which side is center conductor and which 
> side is shield.
> Clint - W5CPT


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>