[Top] [All Lists]

[TowerTalk] Inverted L questions

Subject: [TowerTalk] Inverted L questions
From: Peter Dougherty <>
Date: Thu, 24 Aug 2006 15:31:36 -0400
List-post: <>
Hi all,

Sorry, not a question about Plastic Owls....

I'm expecting the tree service company to be by in a week or two and 
one of the things they agreed to do was mount my 160 Inverted L for 
me. They won't let me up in the bucket with them, thus they'll be 
doing the actual install. So I'm wondering about the actual mechanics 
of making this antenna. The support end will probably be an eye-bolt 
screwed into the top of an oak tree, with a marine pulley attached by 
an openable-link or karabiner type deal. This will be for the end 
support rope, and I'll have a weight on the end for tension.

What I'm not so sure about is how the "bend" in the inverted L wire 
should be accomplished. I'd thought a marine pulley was the answer 
for that end, too, but I've been told absolutely not by several 
folks. This needs to be something the tree service company workers 
can install (with me supervising, of course). I can't pre-make this 
portion since I don't know the height of the tree or where the safest 
place will be in the tree to actually mount the "bend."

Since I'm not a climber by any stretch of the imagination, I need 
this antenna to be as securely erected as possible, and should the 
wire break in a windstorm/ice-storm, etc, I'd like to have some 
arrangement to be able to put it back up with fairly little fuss. 
Since it will be held up by trees on each end (as opposed to a fixed 
height tower), I need to account for sway of the trees (worst-case 
scenario, one's going one way one the other - not likely, but I 
suppose in high winds anything's possible).

On a related note, any idea of a good place to source the 
air-variable cap (~1000pf) that I'll need to mount in the box at the 
base of this L? And for that matter, will an air-variable be able to 
hold up under legal limit or am I now in the realm of vacuum-variable only?

Finally, what gauge and type of wire should be considered for the 
radials, or does it matter? Solid? Stranded? 14? bigger/smaller?

As always, thanks to all for your assistance.




TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>