Check your local yellow pages as well as the internet for industrial
fasteners. Here in Midland we have Prime Fastener which is a part of Alma
Bolt. I know they have a web site, but not if they have a minimum order.
The U-bolts *might * also be available from DX Engineering. They have a lot
of U-bolts and mast clamps as well as the inserts that go between the flat
plate and tower leg.
Hit Google up for galvanized u-bolt sales or sources and you should find
hundreds of sources.
Roger Halstead (K8RI and ARRL 40 year Life Member)
N833R - World's oldest Debonair CD-2
www.rogerhalstead.com
>I am looking for replacement u-bolts for a Rohn 45 rotor plate. I would
> prefer stainless or galvanized. I need 3.
> The old ones seems to be 1.375" id, about 2-2.5" long and 1/4-20. Any idea
> where I can get these?
> Tnx
> N2TK, Tony
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|