Towertalk
[Top] [All Lists]

Re: [TowerTalk] PE Stamp

To: "Van K7VS" <wa7fab@cdsnet.net>,"Pat Masterson" <bat@grumman.com>, <TowerTalk@contesting.com>
Subject: Re: [TowerTalk] PE Stamp
From: <hdmc38@bellsouth.net>
Date: Wed, 13 Sep 2006 12:07:06 -0400
List-post: <mailto:towertalk@contesting.com>
Every municipality has a PE who will sign and seal your drawings.You just have 
to find him.Talk to some small general contractors they will know who to see.It 
may go easier if have a GC pull the permits.Most building departments frown on 
owner builder permits.Hope this helps.

                                                     Joe K4XZ
> 
> From: "Van K7VS" <wa7fab@cdsnet.net>
> Date: 2006/09/13 Wed AM 11:36:17 EDT
> To: "Pat Masterson" <bat@grumman.com>,  <TowerTalk@contesting.com>
> Subject: Re: [TowerTalk] PE Stamp
> 
> Most building departments that I know of around the country require a PE
> "wet stamp" on the drawings (not a copy on a set provided by the
> manufacturer of the tower which in some cases may have been  provided).
> 
> Another option, is to contact any sign installer in your area that installs
> large pole signs such as you see around town for motels, shopping centers,
> larger commercial businesses.  These signs all require a PE wet stamp to be
> submitted to their respective building departments prior to installation,
> for approval.  The sign company can supply you with the name and number of a
> PE doing this kind of work.
> 
> Van, K7VS
> ----- Original Message ----- 
> From: "Pat Masterson" <bat@grumman.com>
> To: <TowerTalk@contesting.com>
> Sent: Wednesday, September 13, 2006 8:03 AM
> Subject: [TowerTalk] PE Stamp
> 
> 
> > I built a 56' Heights Tower about 6 years ago. I paid Heights $245 for
> > stamped plans at that time. It was a 10 page document, and quite
> > professional. I submitted it as-is to my building department. They took
> > one look, and handed me a permit, no questions asked.
> >  You can't go wrong on this one. -pat
> >
> >
> *---------------------------------------------------------------------------
> --*
> > *  Pat Masterson  V01-01,  Northrop Grumman,     *  Ham:KE2LJ
> > *  1 Grumman Road West                           *  President Grumman
> Amateur
> > *  Bethpage, NY 11714                            *  Radio Club  WA2LQO
> > *  email: bat@grumman.com   Fone: 516-346-7125   *  www.qsl.net/wa2lqo
> >
> *---------------------------------------------------------------------------
> --*
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 

JOE PATRICK
SENIOR PLUMBING/MECHANICAL
INSPECTOR CITY OF BOYNTON BEACH

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>