Towertalk
[Top] [All Lists]

[TowerTalk] Rotor Plate attachment

To: towertalk@contesting.com, ab7r@cablespeed.com
Subject: [TowerTalk] Rotor Plate attachment
From: NPAlex@aol.com
Date: Thu, 28 Sep 2006 19:31:07 EDT
List-post: <mailto:towertalk@contesting.com>
 
 
I think you will find that many rotor plates just rest on cross pieces and  
webs.  The TriEx LM-470 series of which I have had 3, all use this  method.  I 
have a spare rotor plate for the LM-470 if anyone is  interested.
 
Norm W4QN
--------------------------------------------Message:  1
Date: Thu, 28 Sep 2006 10:06:55 -0500
From: "FISCHER,GREG"  <ab7r@cablespeed.com>
Subject: [TowerTalk] rotor plate for  HG-70HD
To: towertalk@contesting.com
Message-ID:  <web-130444@be3.admin2.cablespeed.com>
Content-Type: text/plain;  charset="ISO-8859-1"; format="flowed"

Hope to be picking up my new  HG-70HD tower next weekend. 
Looking thru the manual I picked up yesterday it  looks 
like the rotor plate is not fastened to the tower at all, 
but just  rests on these stops that are welded to the 
inside of the top section.   Is that correct?  I don't 
recall ever using or seeing a rotor plate  that was not 
somehow attached.





Regards,
Norm W4QN
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Rotor Plate attachment, NPAlex <=