Let me second the opinion on crimp connectors... I have the tool from RF
Connectors, via DX Engineeering, and it is a great solution... Also, let me
comment that I have been soldering PL-259 for neigh onto 50 years and I am
quite expert at it but the crimp connector is a gift... I can have a connector
in and finished whilst you are still trying to get the iron hot enough...
In aircraft, aerospace, etc., soldered connectors are not allowed because of
high failure rates.. Only crimped or clamped connections meet specs...
denny / k8do
---------------------------------
Sponsored Link
Free Uniden 5.8GHz Phone System with Packet8 Internet Phone Service
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|