Towertalk
[Top] [All Lists]

Re: [TowerTalk] TowerTalk Digest, Vol 47, Issue 95

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] TowerTalk Digest, Vol 47, Issue 95
From: "C Dwight Baker" <cdwightbaker@bellsouth.net>
Date: Sun, 26 Nov 2006 23:01:48 -0500
List-post: <mailto:towertalk@contesting.com>
I forgot to answer one part of your question with respect to the ability to
bend the LMR 600.  Yes, you can bend the cable in the 4 inch PVC 45 degrees
with no problem.  I ran two runs of the 600 cable through the same 3 inch
PVC and made three 90 degree turns with no problems.

Dwight  W4IJY  Vero Beach, FL

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of
towertalk-request@contesting.com
Sent: Sunday, November 26, 2006 9:04 PM
To: towertalk@contesting.com
Subject: TowerTalk Digest, Vol 47, Issue 95

Send TowerTalk mailing list submissions to
        towertalk@contesting.com

To subscribe or unsubscribe via the World Wide Web, visit
        http://lists.contesting.com/mailman/listinfo/towertalk
or, via email, send a message with subject or body 'help' to
        towertalk-request@contesting.com

You can reach the person managing the list at
        towertalk-owner@contesting.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of TowerTalk digest..."


Today's Topics:

   1. Re: HF Vertical Opinions NEEDED... (Gedas)
   2. Re: HF Vertical Opinions NEEDED... (Mike Fatchett)
   3. Re: HF Vertical Opinions NEEDED... (Bob Nielsen)
   4. Grounding the rotor cable (Cqtestk4xs@aol.com)
   5. Needed: Andrews LDF4-50A Coax (Dr M J DiGirolamo)
   6. LMR600 (Jim McDonald)
   7. Re: Grounding the rotor cable (K8RI on TowerTalk)


----------------------------------------------------------------------

Message: 1
Date: Sun, 26 Nov 2006 19:39:12 -0500
From: "Gedas" <w8bya@mchsi.com>
Subject: Re: [TowerTalk] HF Vertical Opinions NEEDED...
To: "'TowerTalk'" <towertalk@contesting.com>
Message-ID: <038301c711bc$761dd960$0401a8c0@Gedas>
Content-Type: text/plain;       charset="iso-8859-1"

Mike, any idea on how your R8 performs vs. another vertical, say a ground
mounted type with radials?  I think that would be very interesting.

Gedas
Image Gallery http://gedas.cc
Web Site        http://w8bya.com

----- Original Message ----- 
From: Mike Fatchett 
To: 'TowerTalk' 
Sent: Sunday, November 26, 2006 7:18 PM
Subject: Re: [TowerTalk] HF Vertical Opinions NEEDED...


I have a couple of R8 Verticals that are elevated and they work pretty well.
The do not require any radials.  Most other verticals will require radials.
Even the BigIR requires radials.  

Mike W0MU 

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of D. Scott MacKenzie
Sent: Sunday, November 26, 2006 5:16 PM
To: Peter Voelpel; towertalk@contesting.com
Subject: Re: [TowerTalk] HF Vertical Opinions NEEDED...

Actually - the report that K7LXC did, is a good, well written report, with
good experimental data to back up the claims.  It certainly helped me make
an informed decision based on DATA as opposed to opinions.....

Opinions are like a A...holes - everyone has them.  But data is worth the
price.....

Scott

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of Peter Voelpel
Sent: Sunday, November 26, 2006 4:11 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] HF Vertical Opinions NEEDED...


I wonder whether you like to give helpful advise or make profit...

73
Peter

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of K7LXC@aol.com

In a message dated 11/26/2006 11:30:40 A.M. Pacific Standard Time,
towertalk-request@contesting.com writes:

>  I am going to be relocating to a new QTH and was looking at  getting 
> a  new
multiband vertical.  I would like to have  something that would be for 40 -
15 meters.   I know there are  lots of options out there, but just not sure
which ones are really worth  the money.  I have been steering more thowards
the Hy-Gain.  Any  help or opinions would greatly be appreciated.


        While we didn't test the  SteppIR, there are a bunch of other
verticals that we tested in our vertical  antenna comparison report
available at _www.championradio.com/publications.html_
(http://www.championradio.com/publications.html) .


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

------------------------------

Message: 2
Date: Sun, 26 Nov 2006 17:47:29 -0700
From: "Mike Fatchett" <mike@mallardcove.com>
Subject: Re: [TowerTalk] HF Vertical Opinions NEEDED...
To: "'Gedas'" <w8bya@mchsi.com>,        "'TowerTalk'"
        <towertalk@contesting.com>
Message-ID: <20061127004747.70C2C31A00D@dayton.contesting.com>
Content-Type: text/plain;       charset="us-ascii"

I don't have any other verticals to compare it to.  I don't know if the
publication K7LXC was citing includes the R8.  I worked plenty of DX with it
this weekend but I don't have anything to comapare it to.  I am surprised by
what I can work at times though.

Mike W0MU 

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Gedas
Sent: Sunday, November 26, 2006 5:39 PM
To: 'TowerTalk'
Subject: Re: [TowerTalk] HF Vertical Opinions NEEDED...

Mike, any idea on how your R8 performs vs. another vertical, say a ground
mounted type with radials?  I think that would be very interesting.

Gedas
Image Gallery http://gedas.cc
Web Site        http://w8bya.com

----- Original Message -----
From: Mike Fatchett
To: 'TowerTalk' 
Sent: Sunday, November 26, 2006 7:18 PM
Subject: Re: [TowerTalk] HF Vertical Opinions NEEDED...


I have a couple of R8 Verticals that are elevated and they work pretty well.
The do not require any radials.  Most other verticals will require radials.
Even the BigIR requires radials.  

Mike W0MU 

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of D. Scott MacKenzie
Sent: Sunday, November 26, 2006 5:16 PM
To: Peter Voelpel; towertalk@contesting.com
Subject: Re: [TowerTalk] HF Vertical Opinions NEEDED...

Actually - the report that K7LXC did, is a good, well written report, with
good experimental data to back up the claims.  It certainly helped me make
an informed decision based on DATA as opposed to opinions.....

Opinions are like a A...holes - everyone has them.  But data is worth the
price.....

Scott

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of Peter Voelpel
Sent: Sunday, November 26, 2006 4:11 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] HF Vertical Opinions NEEDED...


I wonder whether you like to give helpful advise or make profit...

73
Peter

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of K7LXC@aol.com

In a message dated 11/26/2006 11:30:40 A.M. Pacific Standard Time,
towertalk-request@contesting.com writes:

>  I am going to be relocating to a new QTH and was looking at  getting 
> a  new
multiband vertical.  I would like to have  something that would be for 40 -
15 meters.   I know there are  lots of options out there, but just not sure
which ones are really worth  the money.  I have been steering more thowards
the Hy-Gain.  Any  help or opinions would greatly be appreciated.


        While we didn't test the  SteppIR, there are a bunch of other
verticals that we tested in our vertical  antenna comparison report
available at _www.championradio.com/publications.html_
(http://www.championradio.com/publications.html) .


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



------------------------------

Message: 3
Date: Sun, 26 Nov 2006 17:03:09 -0800
From: Bob Nielsen <nielsen@oz.net>
Subject: Re: [TowerTalk] HF Vertical Opinions NEEDED...
To: TowerTalk List <towertalk@contesting.com>
Message-ID: <DCE3C525-ECCB-49C9-80A4-A16ED9A86D91@oz.net>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed

Yes, it does include the R8, but it wasn't elevated much and there  
was a ground screen.  Based on the results quoted, I was seriously  
looking at the R8, but the AV-640 is nearly identical except for not  
using traps and I went with that.

Steve and Ward's yagi report is also excellent.  I worked on antenna  
ranges for many years in the aerospace industry and couldn't find  
anything to fault in their test methods.

Bob, N7XY

On Nov 26, 2006, at 4:47 PM, Mike Fatchett wrote:

> I don't have any other verticals to compare it to.  I don't know if  
> the
> publication K7LXC was citing includes the R8.  I worked plenty of  
> DX with it
> this weekend but I don't have anything to comapare it to.  I am  
> surprised by
> what I can work at times though.
>
> Mike W0MU
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of Gedas
> Sent: Sunday, November 26, 2006 5:39 PM
> To: 'TowerTalk'
> Subject: Re: [TowerTalk] HF Vertical Opinions NEEDED...
>
> Mike, any idea on how your R8 performs vs. another vertical, say a  
> ground
> mounted type with radials?  I think that would be very interesting.
>
> Gedas
> Image Gallery http://gedas.cc
> Web Site        http://w8bya.com
>
> ----- Original Message -----
> From: Mike Fatchett
> To: 'TowerTalk'
> Sent: Sunday, November 26, 2006 7:18 PM
> Subject: Re: [TowerTalk] HF Vertical Opinions NEEDED...
>
>
> I have a couple of R8 Verticals that are elevated and they work  
> pretty well.
> The do not require any radials.  Most other verticals will require  
> radials.
> Even the BigIR requires radials.
>
> Mike W0MU
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of D. Scott  
> MacKenzie
> Sent: Sunday, November 26, 2006 5:16 PM
> To: Peter Voelpel; towertalk@contesting.com
> Subject: Re: [TowerTalk] HF Vertical Opinions NEEDED...
>
> Actually - the report that K7LXC did, is a good, well written  
> report, with
> good experimental data to back up the claims.  It certainly helped  
> me make
> an informed decision based on DATA as opposed to opinions.....
>
> Opinions are like a A...holes - everyone has them.  But data is  
> worth the
> price.....
>
> Scott
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com]On Behalf Of Peter Voelpel
> Sent: Sunday, November 26, 2006 4:11 PM
> To: towertalk@contesting.com
> Subject: Re: [TowerTalk] HF Vertical Opinions NEEDED...
>
>
> I wonder whether you like to give helpful advise or make profit...
>
> 73
> Peter
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of K7LXC@aol.com
>
> In a message dated 11/26/2006 11:30:40 A.M. Pacific Standard Time,
> towertalk-request@contesting.com writes:
>
>>  I am going to be relocating to a new QTH and was looking at  getting
>> a  new
> multiband vertical.  I would like to have  something that would be  
> for 40 -
> 15 meters.   I know there are  lots of options out there, but just  
> not sure
> which ones are really worth  the money.  I have been steering more  
> thowards
> the Hy-Gain.  Any  help or opinions would greatly be appreciated.
>
>
>         While we didn't test the  SteppIR, there are a bunch of other
> verticals that we tested in our vertical  antenna comparison report
> available at _www.championradio.com/publications.html_
> (http://www.championradio.com/publications.html) .
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>



------------------------------

Message: 4
Date: Sun, 26 Nov 2006 20:39:02 EST
From: Cqtestk4xs@aol.com
Subject: [TowerTalk] Grounding the rotor cable
To: TOWERTALK@contesting.com
Message-ID: <c3d.98fb020.329b9bb6@aol.com>
Content-Type: text/plain; charset="US-ASCII"

At 12:47 PM 11/26/2006, Bill Turner wrote:
>I've read the PolyPhaser  document on protection for ham stations but
>it is vague on how to protect  rotator cables. First, I wonder how much
>protection, if any, is needed in  the first place? In my tower, the
>rotator is inside the tower and the  control lines run down inside the
>tower as well. Coming out from the  tower at the bottom, they run
>underground to the shack, about 70 feet  away. It seems to me that
>neither the rotator nor the lines 
``~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
Interesting thoughts.  I NEVER ran any Polyphasers etc on my rotor  cables.

Everything was disconnected at the bulkhead by Cinch-Jones  plugs.
Amazingly 
even though I had lots of rotors on the 200 foot  towers, I never had a
rotor 
failure from a lightning hit...mechanical  damage from wind etc, but no 
electrical problems.  My gut feeling is there  are few direct hits on the
rotor 
cables and most of the damage from  non-disconnected stems from the induced 
voltage of the hit and perhaps providing  a great ground for the main
lighting 
charge to travel to ground through the  house mains by way of a short,
jumping from 
the tower or coax to the  cable.
 
Bill K4XS/KH6


------------------------------

Message: 5
Date: Sun, 26 Nov 2006 20:48:36 -0500
From: "Dr M J DiGirolamo" <DrD@2020.com>
Subject: [TowerTalk] Needed: Andrews LDF4-50A Coax
To: <towertalk@contesting.com>
Message-ID: <00ba01c711c6$27c64310$6701a8c0@fm55k01>
Content-Type: text/plain;       charset="us-ascii"

Hi Gang,

  I'm looking for two strands of Andrews LDF4-50A (1/2" hardline) of about
110'
each.

  Anyone have some lengths laying around, not being used?

73,

Mike DiGirolamo, W4XN
Charlottsville, VA 22901



------------------------------

Message: 6
Date: Sun, 26 Nov 2006 20:02:15 -0600
From: "Jim McDonald" <jim@n7us.net>
Subject: [TowerTalk] LMR600
To: <towertalk@contesting.com>
Message-ID: <004801c711c8$17eda490$6401a8c0@Dell8300>
Content-Type: text/plain;       charset="us-ascii"

Is LMR600 or the equivalent too stiff to pass through three 45-degree sweeps
in a 4" PVC?  How about with an 89' crank-up tower?  I am trying to decide
whether to reuse my Davis RF Bury-Flex or replace it.  This antenna, a 4L
SteppIR, will have 6M on it, and I've never had to be concerned with
attenuation for that band before.

 

Jim N7US 

 



------------------------------

Message: 7
Date: Sun, 26 Nov 2006 21:03:49 -0500
From: "K8RI on TowerTalk" <K8RI-on-TowerTalk@tm.net>
Subject: Re: [TowerTalk] Grounding the rotor cable
To: <TOWERTALK@contesting.com>
Message-ID: <007101c711c8$4d4d6e40$6500a8c0@SecondOne>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
        reply-type=original

I don't disconnect anything since I finished the ground system installation.

That's mainly because the connections are too difficult to get at and the 
storm would be past by the time I could get them disconnected.

Since the ground system was finished I've had no damage yet the tower takes 
at least 3 direct hits on average per year. It was five the first half of 
this past summer.  I say at least as those have been observed.

IF I recall correctly Tom said he didn't disconnect anything either, but 
I've only seen one post from him in recent months. I understand he's over on

the amps reflector.

Roger Halstead (K8RI and ARRL 40 year Life Member)
N833R - World's oldest Debonair CD-2
www.rogerhalstead.com (Use return address from home page)


> At 12:47 PM 11/26/2006, Bill Turner wrote:
>>I've read the PolyPhaser  document on protection for ham stations but
>>it is vague on how to protect  rotator cables. First, I wonder how much
>>protection, if any, is needed in  the first place? In my tower, the
>>rotator is inside the tower and the  control lines run down inside the
>>tower as well. Coming out from the  tower at the bottom, they run
>>underground to the shack, about 70 feet  away. It seems to me that
>>neither the rotator nor the lines
> ``~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> Interesting thoughts.  I NEVER ran any Polyphasers etc on my rotor 
> cables.
> Everything was disconnected at the bulkhead by Cinch-Jones  plugs. 
> Amazingly
> even though I had lots of rotors on the 200 foot  towers, I never had a 
> rotor
> failure from a lightning hit...mechanical  damage from wind etc, but no
> electrical problems.  My gut feeling is there  are few direct hits on the 
> rotor
> cables and most of the damage from  non-disconnected stems from the 
> induced
> voltage of the hit and perhaps providing  a great ground for the main 
> lighting
> charge to travel to ground through the  house mains by way of a short, 
> jumping from
> the tower or coax to the  cable.
>
> Bill K4XS/KH6
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 



------------------------------

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


End of TowerTalk Digest, Vol 47, Issue 95
*****************************************


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>