The chart for wire size on the Tail Twister is on page 3 of my manual.
(Section 5. Wiring and check-out)
For a max length of 200 feet wires to terminals 1 and 2 should be #16 while
3 though 8 are #20
For a max of 300 feet it's #14 to 1 and 2 with #18 to terminals 3 through 8
If you go all the way to 500 feet it's #12 for 1 and 2 with #16 to 3 through
8
Roger Halstead (K8RI and ARRL 40 year Life Member)
N833R - World's oldest Debonair CD-2
www.rogerhalstead.com
> What is the minimum rotor control cable size for a 250 ft run to a
> Tailtwister?
>
>
>
> Allen Ross Brier, N5XZ SET
>
> BriTech Systems Incorporated
>
> NICET Fire Alarm Level IV
>
> NICET Sp. Hazards / Sprinkler Systems Level I
>
> 1515 Windloch Lane
>
> Richmond, Texas 77469-2553
>
> (281) 342-1590
>
> (281) 342-0940 (FAX)
>
> (713) 705-4801 (Cell)
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|