Towertalk
[Top] [All Lists]

Re: [TowerTalk] SteppIR MonstIR Modeling

To: TOWERTALK@contesting.com
Subject: Re: [TowerTalk] SteppIR MonstIR Modeling
From: Cqtestk4xs@aol.com
Date: Fri, 1 Dec 2006 20:22:01 EST
List-post: <mailto:towertalk@contesting.com>
In a message dated 12/2/2006 12:56:36 A.M. Greenwich Standard Time,  
w9ac@arrl.net writes:

Anyone  willing to run some elevation profiles for 40M & 20M?   Tnx!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Paul
 
I am going to be putting up a 4 el MonstIR at 90 feet but it is going to be  
on a pretty high hill overlooking the Pacific in KH6.  It will be stacked  
with two four el SteppIRs at 30 and 60.
 
I have had lots of experience with antennas at various heights since I  ran a 
two bay stack at 200/90, a four bay stack for 20 at 200/150/100/150,  a four 
bay stack for 15 at 140/105/70/35 and a six bay for 10 starting at  165....all 
switchable to top, bottom, in phase and out of phase.
 
>From my experience, the antenna will definitely be too high for most work  on 
10 and 15, too high for EU on 20 and too high for EU on 40.  It should  
scream to JA /VK  on 20 and 40.  Some of the MM stations up in the  northeast 
can 
probably add to my comments.
 
Let me know if other send you files.  I would be most interested in  the 
results.
 
By the way, if I had to choose a height for your MonstIR, it would be  100 
feet, especially with you being so close to EU.
 
Bill  K4XS/KH6
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>