----- Original Message -----
From: "Dan Zimmerman N3OX" <email@example.com>
Sent: Tuesday, December 05, 2006 2:43 PM
Subject: Re: [TowerTalk] Grey PVC Loading Coil
> "And 14.3 watts more than I can radiate on 160m"
> Yeah, if I find I can *hear* anything on 160 with this thing, I'll
> pursue more efficient loading schemes so I don't lose so much in the
Puts some top loading wires on the vertical and you
should be able to nearly double the radiation resistance.
This will reduce the base current and hence the ground
losses and coil losses. It will also reduce the amount
of inductance needed, so peak voltage across the coil
will be reduced. I've run a 45' vertical with a combination
of top hat wires and center inductive loading on 160
with very good results. Radiation resistance is about
6 ohms. With a good ground system efficiency seems
to be very good (parking it on a salt flat doesn't hurt
73, Mike W4EF............................
I use black PVC as coil forms at 1200 watts on 160
with no problems.
TowerTalk mailing list