[Top] [All Lists]

Re: [TowerTalk] Ham IV vs Yaesu

Subject: Re: [TowerTalk] Ham IV vs Yaesu
From: Joe - WDØM <>
Date: Fri, 08 Dec 2006 11:21:16 -0700
List-post: <>
Used to have a Ham IV - sold it and bought the 
Yaesu G-1000.  I'm very happy with that 
decision.  I've had the Yaesu for about 7 years, 
and had no problems.  Used it when I lived in 
Alaska, and it survived 100 mph plus wind gusts, 
turning a Mosley Pro57B40 and a Cushcraft 5L 6M 
beam.  It now turns my SteppIR 4L, and the wind 
gusts here in CO have hit 88 mph.  Combined with 
the IdiomPress rotor controller card, it's a 
wonderful piece of equipment.  YMMV....


At 03:40 AM 12/8/2006, wrote:
>Hi gang,
>I am writing for a friend who is not Internet enabled.
>He has been a Ham IV user since it's introduction. As a moicrowaver, his
>towers see a good load. He keeps a spare rotor 
>to swap out when one in service
>fails, which is often.
>He is now considering replacing these (as they fail again) with Yaesu
>You opinions between these two rotors (only these please) is greatly
>John, N9RF

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>