Towertalk
[Top] [All Lists]

[TowerTalk] Rectangular Quad Loop.

To: towertalk@contesting.com
Subject: [TowerTalk] Rectangular Quad Loop.
From: Chris Keladis <ckeladis@gmail.com>
Date: Mon, 18 Dec 2006 15:19:18 +1100
List-post: <mailto:towertalk@contesting.com>
Hi all,

I was browsing Mr Cebik's site with an interest in constructing a 
quad-loop 15M monoband antenna suspended in a tree, using #16 AWG 
insulated wire.

As he points out, a rectangular shape is preferred, to slightly increase 
gain and lower the feedpoint impedance to close to 50ohm.

I'm new to antenna modeling and have tried a few things in some antenna 
modeling programs and the SWR and other variables are less than optimal.

Was hoping i could get some guidance from the group with regard to 
coming up with an optimal design for this configuration?

I'd prefer to directly feed with a (short) run of RG58C/U and a choke.

Many thanks in advance for any assistance.



73s,

Chris.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>