Why would anyone want to use aluminum for a mast? Rust resistance?
Lightweight? Flexibility? None of these are necessary characteristics of a
mast. The toughest aluminum alloy made doesn't come close to most steel
alloys. I recall back in the 70's a certain ham(a WB9) decided to use
aluminum to stack some beams. To stiffen it up, he drove a hardwood dowel
into the mast. 6 months later the top half broke off in a wind storm and
came right thru his kitchen roof. True story.
----- Original Message -----
From: "D. Scott MacKenzie" <email@example.com>
To: "Roger Kissel" <firstname.lastname@example.org>; <email@example.com>
Sent: Wednesday, January 03, 2007 7:19 PM
Subject: Re: [TowerTalk] Aluminum mast
>I would inspect it - perhaps doing a dye-penetrant examination (look at
> welding supply stores) - but other than that - it should work well as long
> as you apply adequate safety factor and do not load it excessively
> -----Original Message-----
> From: firstname.lastname@example.org
> [mailto:email@example.com]On Behalf Of Roger Kissel
> Sent: Wednesday, January 03, 2007 7:14 PM
> To: firstname.lastname@example.org
> Subject: [TowerTalk] Aluminum mast
> Hi All
> I think I recall seeing a comment about mast, tubing and pipe.
> Back in my early days, we used extruded 6061-T6 in 2 inch diameter with
> inch wall. Many of us sprung for the tubing and put as much os 20 feet of
> out the top of the tower. It seemed to hold up and I don't remember anyone
> having any problem with it.
> That being said, I'm planning to put a tower with some HF antennae and I
> found my old 24 foot 6061 mast in the barn. It's about 30 years old and
> isn't even corroded. You know what I'm planning to do, so let me hear
> why I SHOULDN'T use this. Especially after all the years of great track
> record from the locals in southwestern Ohio.
> Dave vs. Carl: The Insignificant Championship Series. Who will win?
> TowerTalk mailing list
TowerTalk mailing list