[Top] [All Lists]

[TowerTalk] Aluminum mast

To: <>
Subject: [TowerTalk] Aluminum mast
From: <>
Date: Wed, 3 Jan 2007 21:52:26 -0500
List-post: <>
I am a big fan of aluminum masts and I use them on both of my P40A towers 
shown on .  They are not as strong as steel and they 
do bend more so you have to make sure that you don't overload them with 
antennas.  I like them in my application because they corrode much slower 
than steel.  If there are antennae on your mast you should use a garden hose 
to wash out the insects that crawled inside before installing it : )

John KK9A

Subject: [TowerTalk] Aluminum mast
From: "Roger Kissel" <>
Date: Wed, 03 Jan 2007 19:14:15 -0500
List-post: <>

Hi All

I think I recall seeing a comment about mast, tubing and pipe.

Back in my early days, we used extruded 6061-T6 in 2 inch diameter with 1/4 
inch wall. Many of us sprung for the tubing and put as much os 20 feet of it 
out the top of the tower. It seemed to hold up and I don't remember anyone 
having any problem with it.

That being said, I'm planning to put a tower with some HF antennae and I 
found my old 24 foot 6061 mast in the barn. It's about 30 years old and 
isn't even corroded. You know what I'm planning to do, so let me hear why I 
SHOULDN'T use this. Especially after all the years of great track record 
from the locals in southwestern Ohio.



TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Aluminum mast, john <=