Towertalk
[Top] [All Lists]

[TowerTalk] RE : Coax Connectors

To: <g3rzp@g3rzp.wanadoo.co.uk>, <mclarson@rcc.com>,"'Roger Kissel'" <kc8hz@hotmail.com>, <towertalk@contesting.com>
Subject: [TowerTalk] RE : Coax Connectors
From: "hermans" <on4kj@skynet.be>
Date: Thu, 4 Jan 2007 17:05:50 -0000
List-post: <mailto:towertalk@contesting.com>
I can confirm what Peter says here.
Used to be responsable of production lines in the late 50's early 60's, and
that was the way soldered thousands of PL's ( of good quality..... ).

Jos on4kj   

-----Message d'origine-----
De : towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] De la part de Peter Chadwick
Envoyé : jeudi 4 janvier 2007 15:44
À : mclarson@rcc.com; 'Roger Kissel'; towertalk@contesting.com
Objet : Re: [TowerTalk] Coax Connectors


A hot air gun, as used for paint stripping, is excellent for heating the
body of the 259 up fast. Then a 40 watt Weller is adequate. No problems at
all. 73 Peter G3RZP _______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>