I think he was talking about the orion 2800 not the Yaesu 2800.
To: email@example.com; firstname.lastname@example.org; Gary.Stone@va.gov
Cc: email@example.com; firstname.lastname@example.org; email@example.com;
Sent: Mon, 8 Jan 2007 3:22 PM
Subject: RE: [TowerTalk] Rotor Selection Advice Wanted - Heavy Duty
I do not know where he comes up with that hearsay nonsense...
The Yaesu G2800DXA does not have any of these alleged problems...
I have MonstIR#1 - it has been up for 2 years...
Far longer than any other MonstIR!!!
I am about 1 mile from the Pacific Coast about 600' ASL with a clear
every wind that comes from Japan.
Using a Yaesu G-2800DXA...NO SLIPPAGE on the rotor...
I chose the G-2800DXA because it had the best braking rating of all
And it does not seem to have any problem whatsoever turning the array.
Howard S. White Ph.D. P. Eng., VE3GFW/K6 ex-AE6SM KY6LA
"No Good Deed Goes Unpunished"
"Ham Antennas Save Lives - Katrina, 2003 San Diego Fires, 911"
[mailto:firstname.lastname@example.org] On Behalf Of
Sent: Monday, January 08, 2007 11:09 AM
Subject: Re: [TowerTalk] Rotor Selection Advice Wanted - Heavy Duty
As far as I'm aware, the 2800 has been proven time-and-again to be
of holding a MonstIR in even a moderate wind. I suggest you avoid
needlessly repeating this mistake, and implement your prop-pitch
right from the start.
---- Original message ----
>Date: Mon, 8 Jan 2007 10:21:12 -0800 (PST)
>From: "Rick Karlquist" <email@example.com>
>Subject: Re: [TowerTalk] Rotor Selection Advice Wanted - Heavy Duty
>To: "Stone, Gary R." <Gary.Stone@va.gov>
>Cc: firstname.lastname@example.org, email@example.com, firstname.lastname@example.org
>I have a MonstIR that I am putting on an HDX5106. I am going
>to use the M2 rotator that I got with the tower. If it breaks,
>I am going to replace it with a prop pitch. The ProSisTel will
>not fit into my tower. Probably not even a 689. Neither will
>the large Alfa Spid, and the smaller one is not strong enough.
>AFAIK, there are no other alternatives, unless you want to mount
>a ProSisTel or large Alfa on top of the tower. Then the rotor
>has to take all that extra stress, or you have to build a
>on top of the tower with a bearing above the rotor.
>Stone, Gary R. wrote:
>> I have the ProSisTel, the model (number escapes me - but it is the
>> rated for 39 sq feet). I have been happy with it for the time I have
>> WARC7 about 12 feet about the Optibeam). I would not (personally)
>> recommend the M2 Orion rotator (went thru 3 of them).
>> Gary Stone, N5PHT
>> I have a Steppir Monstir antenna (Love it by the way).
>> It has a Wind Surface Area of 23.9 square feet.
>> The rotor will be mounted in a US Towers 589 or 689 as soon as I can
>> purchase a used one (any leads on this would also be appreciated!).
>> Bill Erickson
>TowerTalk mailing list
TowerTalk mailing list
Check out the new AOL. Most comprehensive set of free safety and
security tools, free access to millions of high-quality videos from
across the web, free AOL Mail and more.
TowerTalk mailing list