Just a notice to your nice write up.What I do when opening a rotor I open
them in a low carton box or plastic box.This way no ball bearings on the
floor !
on4ma marc
----- Original Message -----
From: <jpk5lad@cox.net>
To: <TowerTalk@contesting.com>
Sent: Monday, January 08, 2007 6:33 PM
Subject: [TowerTalk] Repairing CDE/HyGain/MFJ antenna rotators
> After repaired my HAMII rotator the other night, I
> wrote up some details, partly to jog my own memory
> later and partly to share with others, on doing the
> repairs. I put it on my web page Saturday night.
> See:
>
> <http://www.hayseed.net/~jpk5lad/Rotors/Rotator%2
> 0Repair.htm>
> or
> http://tinyurl.com/yx4xkr
>
> I thought there would be quite a few, if not many,
> articles out on the web on the same subject but I
> was surprised to see this was not true. A long
> Google search only found one other somewhat
> similar article on this topic. I'm sorry now that I didn't
> take more pictures while I had it apart but perhaps
> what is there will help someone.
>
> If this helps anyone to repair their CDE/HyGain/MFJ
> rotator, then I'm happy.
>
> 73,
> Jim - K5LAD
>
> "It's so simple to be wise. Just think of something
> stupid to say and then don't say it." -- Sam
> Levenson
> =======================================
> My Web Page - http://www.hayseed.net/~jpk5lad
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.432 / Virus Database: 268.16.7/620 - Release Date: 8/01/2007
16:12
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|