In a message dated 1/10/2007 1:50:57 A.M. Greenwich Standard Time,
ab2kc@optonline.net writes:
I have dual polarization on my 10 meter quad. Should be the same for an 80M.
In order for it to work, each feedpoint MUST be gamma matched AND choked off
with a 1:1 balun (coiled coax works, but lots needed for a 80M freq).
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Lots is correct, but doable if you use RG 58 or RG 59 (for matching
purposes). I used 4 inch PVC for the coil frame.
Bill K4XS/KH7XS
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|