I think this may be the correct link.
Gerald Boutin, VE6WA
Link comes up as can not be found on my machine.
[mailto:email@example.com] On Behalf Of firstname.lastname@example.org
Sent: Thursday, January 11, 2007 3:20 PM
To: email@example.com; TowerTalk@contesting.com
Subject: Re: [TowerTalk] Rohn TB3 or TB4
On Thu, 11 Jan 2007 15:08:00 -0500 "Roger Kissel" <firstname.lastname@example.org>
> So you're all saying that lubrication should not be used with a Rohn
> thrust bearing ?
> For the time being, I have built back the bad races with TIG and am
> going to remachine the grooves and use new balls and see if I can
> bearing. If not, I'll put up a STEEL bearing.
An article by K1IR on repairing a "stuck" Rohn TB-3 thrustbearing was
first posted on TowerTalk, and then printed in NCJ. Here's the link to
the TowerTalk posting:
Fred Hopengarten K1VR email@example.com
Six Willarch Road * Lincoln, MA 01773-5105
781/259-0088; FAX 419/858-2421
TowerTalk mailing list