[Top] [All Lists]


To: <>, <>
Subject: Re: [TowerTalk] [POTENTIAL SPAM] TIC RINGS
From: "Paul Bittner" <>
Date: Fri, 12 Jan 2007 21:25:21 -0600
List-post: <>
K0XG has  very very nice ring that could be used.  I saw it at Dayton this 
past year and was REALLY IMPRESSED...
and that comes  from one who has made a 6 foot ring from silo unloader ring 
that sits on a 56" face tower with heavy 3L Hy-Gain  403B on it.
Paul  W0AIH

Do not know the new Rotor Rings by TIC.  Had one of their first--and their 
2nd and do not use them anymore.
Do not know recent productions but if K3LR has had good luck with them, 

73 and Happy New Year Bill from   W0AIH
----- Original Messag ----- 
From: <>
To: <>
Sent: Friday, January 12, 2007 12:25 PM

> My efforts to get a tower up in KH6 have taken a slight turn and I may 
> have
> to make modifications to my tower plans since the county is screwing 
> around
> with me (long story, and not surprising).
> Anybody out there have experience with using TIC Rings to rotate a BIG
> antenna...specifically a MonstIR SteppIR...about 21 square feet?  I may 
> have to go
> this route and need to know if it is a viable alternative.  No  way would 
> a
> traditional swingarm sidemount (310 degree coverage) work for this 
> monster.
> Anybody have an answer for this one?
> Bill  K4XS/KH7XS
> _______________________________________________
> _______________________________________________
> TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>