[Top] [All Lists]

Re: [TowerTalk] coax input panel

Subject: Re: [TowerTalk] coax input panel
Date: Wed, 17 Jan 2007 00:29:05 EST
List-post: <>
In a message dated 1/17/2007 5:22:29 A.M. Greenwich Standard Time, writes:

1)  Should I use a aluminum panel so all coax cables and hardlines are  
grounded together and to a ground rod or should I use a Plexiglas panel so  
they are all insulated from each other?  Would 1/8" be a good  thickness?

All together....all at same potential.  And, make sure you have some  sort of 
good dround at the bulkhead with Polyphasers or something similar.

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>